Emergency hull repairs while at sea
-
- Member
- Posts: 116
- Joined: Thu Jul 19, 2018 5:18 am
Emergency hull repairs while at sea
Hi all, certainly in Nelsons time, and possibly throughout the years of sail, emergency hull repairs could and were undertaken while at sea, by fothering. This was the practice of wrapping a sail around the bottom of the hull, being fastened on either side of the ship, hoping the pressure of water trying to get into the hole would push the sail in, providing a decent plug. Come the 20th century and the demise of sail, was there anything similar to effect emergency hull repairs to warships, to ‘get them home’.
Regards
Fatboy Coxy
Regards
Fatboy Coxy
-
- Senior Member
- Posts: 553
- Joined: Wed Jul 06, 2011 1:00 pm
Re: Emergency hull repairs while at sea
You could put a mattress against a smallish hole and brace it. Standard test to see if it would hold was to get a beefy dude to swing from the overhead an hit it with both feet. This is good information up to 197something when my ship was doing training at Gitmo.
-
- Member
- Posts: 116
- Joined: Thu Jul 19, 2018 5:18 am
Re: Emergency hull repairs while at sea
Thank's OpanaPointer
-
- Senior Member
- Posts: 553
- Joined: Wed Jul 06, 2011 1:00 pm
Re: Emergency hull repairs while at sea
For more robust bracing look at the pictures of ships who lost their bows in a collision.
Source: https://www.reddit.com/r/WarshipPorn/co ... all_after/
Source: https://www.reddit.com/r/WarshipPorn/co ... all_after/
-
- Member
- Posts: 116
- Joined: Thu Jul 19, 2018 5:18 am
Re: Emergency hull repairs while at sea
Clearly a credit to the ships architect and builders for the construction of a ship so well compartmented.
I wonder how much spare timber might be carried by a ship for emergency bracing, and just how low and accessible it might be stored in a ship. Back in the days of the wooden ships, they must have carried a lot, but by the 20th century?
I wonder how much spare timber might be carried by a ship for emergency bracing, and just how low and accessible it might be stored in a ship. Back in the days of the wooden ships, they must have carried a lot, but by the 20th century?
-
- Senior Member
- Posts: 553
- Joined: Wed Jul 06, 2011 1:00 pm
Re: Emergency hull repairs while at sea
In anticipation of such events as illustrated in my last post the outfitting parties would have tucked timber wherever it would fit. I was on USS MacDonough when we were in Gitmo for training. She had just come out of the yards and one of things done during a yard period is to check that we have everything we're supposed to have. I helped load 4x4 and 8x8 wood at one point, stashing it in the overhead piping when we could find a spot. It would take some exploration to find out how much was considered "minimum load out" for that item.
Re: Emergency hull repairs while at sea
This is from the Handbook of Damage Control. It is technical BUT if you persevere there is no reason even those without formal damage control training can grasp the basic concepts, after all it was written for sailors
CHAPTER 8
BATTLE DAMAGE REPAIR
https://www.globalsecurity.org/military ... pr_ch8.pdf
CHAPTER 36 SHORING
https://maritime.org/doc/dc/part9.htm
CHAPTER 8
BATTLE DAMAGE REPAIR
https://www.globalsecurity.org/military ... pr_ch8.pdf
CHAPTER 36 SHORING
https://maritime.org/doc/dc/part9.htm
"You see those battleships sitting there, and you think they float on the water, don't you?... You are wrong, they are carried to sea on the backs of those Chief Petty Officers!" Admiral William Halsey USN
-
- Senior Member
- Posts: 954
- Joined: Wed Feb 05, 2014 7:05 pm
Re: Emergency hull repairs while at sea
Thank you! That's fascinating. It's really interesting the different methods they use to plug holes of various types.
-
- Senior Member
- Posts: 553
- Joined: Wed Jul 06, 2011 1:00 pm
Re: Emergency hull repairs while at sea
I was on DC parties and Inport Fire Parties, worked my way up to #1 Nozzleman. Lots of "fun".